Top
Home
About Us
Glossary
Customer Service
FAQ
Social Media
Buy Direct from the Manufacturer and Save $$
Home of the ORIGINAL PRO AIR CUTTER!
Hello Guest
My Account
View Cart 0
Soap Cutters
Pro Air Soap Cutter
Pro Manual Soap Cutter
Pro M&P Soap Cutter
Loaf Cutter
Soap Molds
Pro High Production Molds
Oil/Wax Tanks
Lye Tanks
Mixing
Pot Tippers
Accessories
Stands (Tanks & Cutters)
Parts/Manuals
PDF Instructions
Tank Replacement Parts
Home
>
Oil/Wax Tanks
> 13 Gallon Jacketed Oil/Wax Tank
13 Gallon Jacketed Oil/Wax Tank Shown with Optional Stand
13 Gallon Jacketed Oil/Wax Tank
0
Review(s)
0
0
5
Price
Your Price:
$990.00
Compare to:
$1,142.00
You Save:
$152.00
(13%)
Availability:
Contact Us
Part Number:
TANK-OIL13
Choose Options
Add an Energy Saving Insulation Jacket
Add an Energy Saving Insulation Jacket
Insulation Jacket for 13 Gallon Tank (+$28.00)
Change to 3000 or 4500 watt Element 220 volt
Change to 3000 or 4500 watt Element 220 volt
3000 Watt Element 220 volt (+$20.00)
4500 Watt Element 220 volt (+$20.00)
Put me on the Waiting List
Review this item
Add to Wish List
Email a friend
*
Stainless Steel
*
Limited Lifetime Warranty
*
Jacketed Tank
*
Heater Box/Thermostat/Element INCLUDED
*
See IMPORTANT INFO below
Description
Customer Reviews
Specifications
Warranty
Options
Important Info
13 Gallon (104 lbs) Jacketed Stainless Steel Tank
Limited Lifetime Warranty on Our Jacketed Tanks!
Great for Soap - Candle Wax - Oils - M&P - Honey - Lotions - Butters - Lip Balms - Creams
Lid – has molded high-temp handle.
Operation Instructions and Production Tips
Heater Box with Element (1500 watt) and Thermostat
Can be upgraded to a 3000 watt or 4500 watt 220 volt Element
Ball Valve
Warranty*
Hold That Heat In! Check our Optional Tank Insulation Jackets
Specifications...
Capacity - approximately 13 gal. (49 L) or 104 lbs (45.4 kg) in weight.
Outer Tank Volume (Water Jacket) - approximately 8.15 gal (30.71L).
Exterior Dimensions – 21”(53 cm) high by 18” (45.7 cm) in diameter
Interior Dimensions - approximately 15” high (38.1 cm) x 16” diameter (40.64 cm)
Flat Bottom
Thermostat
All fittings, Inner and Outer tanks, and lid are 304 Stainless Steel- Cosmetic Grade and meets Organic Certification requirements.
½” (13 mm) Inlet and Outlet
1 ½” (38 mm) Ball Valve
120 Volt, 1500 Watt /Thermostat - (50F to 170F)*.
(Also offered in 220 Volt, 3000 watts/Thermostat for 50 or 60 cycle)
Current draw -12.5 amps at 120 volts
All of our electrical components are UL Listed and/or UL Recognized
We use a NEMA 6-20P for our 220 volt setups. International customers will need to find an adaptor locally.
* NOTE:
In place of water you may use Propylene Glycol (PPG) or Mineral Oil in the jacket.
Makes it easier and more efficient to reach temperatures above 170 degrees
Evaporation is less of an issue. Takes a little longer to heat but has better heat retention.
Less maintenance as well as makes your heating element last longer.
If using PPG use a food grade with inhibitor.
*Limited Lifetime Warranty on Tanks*
Our Stainless Steel Jacketed Tanks are warrantied to be free from defects in materials and workmanship under normal use.
This warranty does not cover damage caused by normal wear and tear, accidents, acts of God, abuse, misuse, use other what it was originally intended.
The tank warranty is valid to the original purchaser only (non-transferable). The customer must return the defective product to our authorized warranty center. We will repair it or if we can't, we will replace it. Shipping is the customer's responsibility (both directions). Contact
[email protected]
for warranty information or to authorize a warranty return. No other warranties expressed or implied are valid.
**Warranty - Thermostats, Cords and Ball Valves are warranted for 180 days from the date of delivery.
**Warranty - Elements, no warranty. All elements are tested before shipping. Make sure your outer water jacket is full before plugging in.
Insulation Jackets for our Stainless Steel 13 Gallon Tanks
Hold That Heat In!
Wrap your tanks with our Insulation Jacket, cut your energy use drastically.
Your materials will heat faster and stay heated longer.
Your Tank Jacket is constructed using heat resistant foam core and heavy foil lining (inside and out).
High R-value, reflective and efficient material, which will conserve heat and energy.
Jacket kits are pre-cut to fit your tank. In minutes you can have your jacket fitted, taped and ready to go.
The kit includes plenty of heavy-duty, foil tape and instructions.
Water, oils, and heat will not affect its insulation value.
Made of ¼” (7mm), High R, Foam Core, Double Sided, Foil Faced, insulation.
Foil tape included.
These Insulation Jackets are Not intended for use with our Lye Tanks.
Please note:
If you purchased a Jacketed Oil/Wax Tank or Lye Tank from Willow Way (SoapEquipment.com) between 1-1-1999 1-1-2019, we manufactured it.
If you need extra molds, replacement parts or anything else, we can help you.
Please contact us and provide the Name it was purchased under and the date purchased.
We cannot cover Warranty Issues, but we will try to help you out.
We manufactured equipment (Cutters, Tanks, Lip Trays, Pot Tippers, Mixers) for Willow Way (SoapEquipment.com) for over 20 years (1995-2018).
Related Items
Small Tank Stand
(0)
Your Price:
$275.00
Contact Us
Recently Viewed Items
Quick View
Privacy Policy
I agree to allow Discount Soap Equipment to store and process my personal data as described in the
Privacy Policy
New Window
Accept
